Home
Stuart Borrill - Meccano parts
Details of Reproduction Parts
Stuart Borril's Meccano Parts

 
Tim Edwards' Meccano Pages
Tim Edwards' Meccano Pages

Reproduction Meccano Parts

Revised Prices - June 2017

(Note - Postage charged at cost)

To email me click here.

ORDER
CODE
DESCRIPTION MECCANO
PART No.
COST  
000 1/2" Cube block - tapped 6 ways   £2.50
001 1/2" Square collar, 1/4" thick - tapped 4 ways with central 4.1mm hole.   £1.75
001A 1/2" Square collar, 1/4" thick - tapped 4 ways with central tapped hole.   £1.75
002 Collar - 5/8" ext dia, 3/8" int. dia. 1/4" thick - Drilled 4.1mm & tapped alternately at 90Deg. 59X
(MW)
£1.75
003 Aero collar 5/16" dia. x 3/16" thick 59A (P52) £0.75
004 5 Hole Coupling 63G £3.25
005 4 Hole Coupling 63F £2.75
006 3 Hole Coupling 63 £2.25
007 2 Hole Coupling 63D £2.00
008 1/2" square, 3 Hole Coupling   £3.00
009 3/8" square, 3 Hole Coupling   £2.75
010 Threaded Coupling 63C £2.75
010A Short Threaded Coupling 64A £2.25
011 Socket Coupling 171 £3.50
012 Handrail Coupling 136A £2.25
013 Handrail Support 136 £2.25
014 Screwed Rod Adaptor 173A £2.00
015 Threaded Boss 64 £1.50
016 Rod Socket 179 £1.75
017 Single Drive Pulley 1/2" long 3/8" dia.   £1.25
018 Double Drive Pulley 5/8" long 3/8" dia.   £1.50
019 Cricket Ball Motor Pulley   £1.50
020 Cone Pulley 1 1/4", 1" & 3/4" dia. 123 £6.00
020A Mini Cone Pulley 3/4", 9/16" & 3/8" dia   £3.50
021 Grease Cup 174 £3.00

022 3/8" dia. Mini Thrust Race + 2 spare balls. 168T £2.00

022A 5/8" outer, 3/8" inner Thrust Race + spare balls.   £2.25
023 Terminal Nut   £1.00
024 Bevel Gear 16 teeth, 45 Deg. Obsolete 30A £5.00
025 Bevel Gear 24 teeth, 45 Deg 30B £5.50
026 Bevel Gear 26 teeth, 45 Deg
(see also my part 044 for a compatible 13 tooth gear)
30 £6.00
026A NEW
Reversed Boss Bevel Gear 26 teeth, 45 Deg
(Useful for use in a confined space)
(Note that short grub screws will be needed to avoid fouling)
  £6.00
027 Bevel Gears 21 teeth and 42 teeth (2:1 ratio) 30E / 30F £14.50
Pair
028 Bevel Gear 16 teeth and 48 teeth 
(3:1 ratio)
30A & 30C £14.50
Pair
029 2 3/4" dia. 6 Spoke Brass Flywheel   £27.50
030 2 3/4" dia. Solid Brass Flywheel with V shaped pulley groove   £30.00
031 Pallet Pin 251 £1.00
032 Pivot Bolt 545 £1.25
033 Electrical Bolt Socket for use with mini-plugs 613A £1.25
034 Suspension Unit 1/2" dia. x 1 1/2" long 120C + 
2 x 120D
£2.00
035 1/2" dia Right Hand Worm 32 £3.00
035x2 1/2" dia Right Hand Worm - Double Start   £4.50
035A 1/2" dia Left Hand Worm   £3.00
035Ax2 1/2" dia Left Hand Worm - Double Start   £4.50
035SH NEW
Worm for use with 25 tooth pinion at 1/2" centres
  £2.75
036 Brass Buffer 120 £1.75
037 2 piece Spring Buffer - Brass and Stainless steel 120A £3.25
038 Coupling Sleeve 5/8" dia. x 1 1/8" long -  3/8" bore   £3.00
039 Coupling Sleeve 5/8" dia. x 1/2" long -  3/8" bore   £2.00
040 2 Hole Captive Nut / Nut Strip 3/8" x 13/16" x 1/8"   £1.25
041 3 Hole Captive Nut / Nut Strip 3/8" x 1 5/16" x 1/8"   £1.50
042 4 Hole Captive Nut / Nut Strip 3/8" x 1 13/16" x 1/8"   £1.75
043 Solid Brass Bush Wheel
6, 8, 10 or 12 holes (please specify)
  £3.50
043A 1" dia Solid Brass Bush Wheel
6 or 8 holes (please specify)
  £2.25
044 Bevel Gear 13 teeth, 45 Deg. (will mesh with standard 26 tooth bevel - Meccano Part 30 - to give 2:1 ratio)    £4.00
045 Bevel Gear 32 teeth, (will mesh with standard 16 tooth bevel - Meccano Part 30A - to give 2:1 ratio)   £6.50
046 Standard Collar 59 £0.75
046A Standard Collar with Threaded Bore   £0.75
047 38 Tooth Solid Brass Contrate Gear   £6.00
048 57 Tooth Solid Brass Contrate Gear   £7.50
048A 25 Tooth Solid Brass Contrate Gear   £5.00
048B 19 Tooth Solid Brass Contrate Gear   £4.00
049 12 Tooth, 30 Deg. Bevel

(Will mesh with standard 48 tooth bevel to give 4:1 ratio)

  £4.00
050 3/4" dia. Thrust pulley
9 x 5/32" balls (3 spare)
(Washers if needed)
  £2.50
051 Special 1/2" Thrust Race
8 x 1/8" balls
  £2.00
052 Loom Shuttle
(Brass or Alloy)
  £25.00
053 Special Steel Screwdriver
Knurled Body
36B £11.00
056 19 Tooth Brass Rack Strip   £6.00
057 Set of 3, 3/8" dia. Silver Steel Rollers for Bending Machine   £15.00
Set
057A Set of 3, 3/8" dia. Silver Steel Rollers 6" long   £20.00
Set
057B Set of 7, Silver Steel Rollers for Plate Leveller   £35.00
Set
 
058 Special Universal Coupling   £6.00
059 Constant Velocity Joint - Female-Female
(Shown both as separate parts and assembled CV Joint)
(Spare balls provided)
  £7.50
059A Constant Velocity Joint - Male-Female
(Shown both as separate parts and assembled CV Joint)
(Spare balls provided)
  £8.00
060 Brass Domed Nut   £0.60
061 Riefler Clock Palletts and Pins   £25.00
062 Meccanograph Control Disk   £17.50
063 Multi Position Dog Clutch   £3.00
(pair)
064 NEW
Solid Brass flanged Wheel 3/4" dia.
  £3.00
065 NEW
Solid Brass flanged Wheel 1/2" dia.
  £2.75
066/12 NEW
12mm A/F wheel Centre for R/C Wheels
  £1.75

MADE TO ORDER

Any part made with triaxle bore
 
Large Axle Parts
5/16" - 8mm - 3/8" and 1/2"
Solid brass square bearing plate 3x3 holes £9.00
Large axle bush wheels £4.50
Steel or brass axles
Cut to length and drilled to requirements

To email me click here.

This page was last updated on 15-06-2017.